Altium designer 17.1 無料ダウンロード.アルティウム製品 ダウンロード

 

Altium designer 17.1 無料ダウンロード.ActiveBOM_AD

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Migrating Existing Model Libraries.CopyComponent | Altium Designer マニュアル | マニュアル

 
 
Jul 28,  · ダウンロード; Altium Designer Documentation. Altium Designer Documentation. Altium Designer Documentation. Baseline Dimension. 製品マニュアル. Created: July 28, | Updated: June 16, 最新情報については、バージョン の をご覧くだ Facilitating real-time cost estimation and tracking for a board design, Altium Designer brings to the table a system that effectively and efficiently aides the designer in managing costs and availability of items used in that design. This system is known simply as g: 無料ダウンロード Jul 31,  · Altium Designer, in conjunction with Altium Vault ( or later) provides a streamlined, simple process to quickly migrate your existing libraries to an Altium Vault. The GUI to this process – the Library Migrator view – presents an intuitive flow that takes initial selected libraries, and migrates them to a target Altium g: 無料ダウンロード
 
 

Altium designer 17.1 無料ダウンロード.回路図シンボルの作成_AD | Altium Designer マニュアル | マニュアル

In Altium Designer, each of these representations is referred to as a Domain Model and each unified Altium Designer component is then the sum of its domain models. The schematic symbol is one of the domain models that, together with the other domain models, defines the unified design g: 無料ダウンロード Jul 31,  · Altium Designer, in conjunction with Altium Vault ( or later) provides a streamlined, simple process to quickly migrate your existing libraries to an Altium Vault. The GUI to this process – the Library Migrator view – presents an intuitive flow that takes initial selected libraries, and migrates them to a target Altium g: 無料ダウンロード お客様がAltium Designerサブスクリプションの有効なメンバーではない場合、下記のフォームに入力して無償評価版をダウンロードしてください。. プライバシーポリシーに同意の上、 [ダウンロード]をクリックしてください。. ご登録いただきましたメール
 
 
 
 

The Via dialog. The Via dialog allows the designer to edit the properties of a Via. A via is used to create vertical connections between the signal layers of a PCB. A via has a hole, that once it is plated, creates this vertical connectivity. Vias can span all layers in the board design, or can start and stop at specific layers.

Note that these types of vias can only be designed in conjunction with the board fabricator, as they must have the appropriate processes and technology to create vias between the specified layers. This dialog can be accessed during placement by pressing the Tab key.

The Start Layer and End Layer settings define a via to be one of the following types:. A testpoint is a location where a test probe can make contact with the PCB to check for correct function of the board. Any via can be nominated as a testpoint. An opening in the solder mask is automatically created by the software, the same shape as the via. This opening can be larger a positive expansion value or smaller a negative expansion value than the via itself, as defined by the Solder Mask Expansion setting.

The expansion is measured from the edge of the copper. Partial and complete tenting of vias can also be achieved by defining an appropriate value for Solder Mask Expansion. This expansion constraint can either be defined on a via-by-via basis in the associated Via dialog, or by defining appropriate Solder Mask Expansion design rules.

By setting the expansion value to a suitable value, you can achieve the following:. Paste and Solder masks are shown in the negative, that is, when you see an object on one of those layers it is actually a hole or opening in that layer.

Summary The Via dialog allows the designer to edit the properties of a Via. Access This dialog can be accessed during placement by pressing the Tab key. After placement, the dialog can be accessed in the following ways: Double-click on the placed object. Place the cursor over the object, right-click and choose Properties from the context menu.

Library – Displays which library the via template is linked to and includes the option to unlink the template from said library. Diameters Simple – The via Diameter is the same on all layers. Top-Middle-Bottom – Different Diameters can be set for the: Top Layer, all internal signal layers, and Bottom Layer respectively.

Top Layer – Specify the via diameter for the Top Layer. Middle Layer – Specify the via diameter for the Middle layers all internal signal layers. Bottom Layer – Specify the via diameter for the Bottom layer. View the dialog page for more information. Note that the same dialog is used for both pads and vias, for a via, it will only have the diameter option. Hole size – The size of the hole in the via.

Tolerance – Setting the hole tolerance attribute can help determine the fits and limits of your board. Diameter – Specify the diameter of the via. Properties Drill Pair – The layers that this via starts and ends on. Net – The net that the via is currently assigned to. Change the net assignment by clicking in the field and choosing a net from the drop down list. Select No Net to specify that the via is not connected to any net.

The Net property of a primitive is used by the Design Rule Checker to determine if a PCB object is legally placed. Locked – Enable this option to protect the via from being edited graphically. Lock a via whose position is critical. If you try to edit a primitive that is locked, you will be informed that the primitive is locked and asked if you wish to proceed with the action.

If this option is unchecked, the primitive can be freely edited without confirmation. The Start Layer and End Layer settings define a via to be one of the following types: Multi-layer Thru-Hole – this type of via passes from the Top layer to the Bottom layer and allows connections to all internal signal layers. Blind – this type of via connects from the surface of the board to an internal electrical layer. Buried – this type of via connects from one internal electrical layer to another internal electrical layer.

Found an issue with this document? お問合せ お近くの営業所にお問合せください。. We’re sorry to hear the article wasn’t helpful to you. Could you take a moment to tell us why? Connect to Support Center for product questions. I do not want to leave feedback.